Research Compound
Easy Touch U-100 Insulin Syringe with Needle
Easy Touch U-100 Insulin Syringe with Needle, 30G 1cc 5/16-Inch (8mm) pack of 10
Select Size
1mL
SKU: SYR
$9.99
Ships today if ordered by 4PM EST
Est. Arrival: 09/24/2026
Volume Discounts
Qty: 1 - 4$9.99 each
Qty: 5 - 9$8.99 each(save $1.00)
Qty: 10+$7.99 each(save $2.00)
Quantity:
1
For Research Use Only. This product is intended for laboratory and scientific research purposes only. It is not a drug or dietary supplement and is not for human or veterinary consumption. Not intended to diagnose, treat, cure, or prevent any disease.
99%+ Purity
COA Included
Fast Shipping
USA Based
Product Details
Precision Needle Design: Easy Touch syringes feature needles manufactured from surgical-grade steel with a film coating, tri-bevel cut, and electro-polished finish to minimize surface imperfections and enhance sharpness, as evaluated by STR Labs.
Optimized Flow Performance: Thin-wall cannula construction allows for improved fluid flow with reduced plunger resistance, supporting smoother and more controlled delivery during laboratory handling.
Enhanced Barrel Construction: Syringe barrels are lubricated for consistent plunger movement, clearly marked for accurate measurement, and designed with pronounced flanges to promote secure handling.
Manufacturing Standards: Easy Touch syringes are produced in accordance with MHC Medical Products’ FDA 510(k) processes, enabling controlled manufacturing of all components, including needle grinding and barrel calibration.
Frequently Asked Questions About Easy Touch U-100 Insulin Syringe with Needle
Answers summarize published research and are provided for laboratory research purposes only.
The Easy Touch U-100 Insulin Syringe with Needle is a single-use laboratory syringe with a permanently attached needle. Each syringe has a 1cc barrel marked in U-100 units, a 30 gauge needle, and a 5/16 inch (8mm) needle length. It is sold in a pack of 10 and is used in research preparation for drawing and measuring small liquid volumes from reconstituted vials.
The Easy Touch U-100 Insulin Syringe with Needle uses a 30 gauge needle that is 5/16 inch, or 8mm, long. The 30 gauge designation means a thin needle diameter, and the short 8mm length is a common choice for laboratory work with small vials. The needle is fixed to the 1cc barrel, so there is no separate needle to attach or remove.
Each pack of the Easy Touch U-100 Insulin Syringe with Needle contains 10 individually wrapped syringes. Every syringe in the pack has the same 1cc capacity, 30 gauge needle, and 5/16 inch needle length. Researchers who work through several vials in a session often keep more than one pack on hand because each syringe is intended for a single use.
The barrel of the Easy Touch U-100 Insulin Syringe with Needle is graduated in units on a U-100 scale, where 100 units equals 1 milliliter. On this 1cc syringe, each unit therefore equals 0.01 milliliter. The markings are printed clearly on the barrel so a researcher can read a measured volume accurately when drawing liquid from a reconstituted research vial.
The needle on the Easy Touch U-100 Insulin Syringe with Needle is made from surgical-grade steel with a film coating, a tri-bevel tip, and an electro-polished finish that reduces surface imperfections. The cannula has a thin-wall design, which gives a wider internal bore for its gauge and lets liquid pass with less plunger resistance during laboratory handling.
The barrel of the Easy Touch U-100 Insulin Syringe with Needle is lubricated so the plunger moves smoothly and consistently. It carries clear U-100 unit markings for accurate measurement and has pronounced finger flanges that give a secure grip. The 1cc capacity suits the small volumes typically drawn from reconstituted peptide vials in a research setting.
In research preparation the Easy Touch U-100 Insulin Syringe with Needle is used to draw a measured volume of liquid from a vial. A common workflow is to draw Bacteriostatic Water into the syringe, add it to a lyophilized vial for reconstitution, and later draw a measured volume of the reconstituted solution for a laboratory procedure. Each syringe is discarded after one use.
The Easy Touch U-100 Insulin Syringe with Needle pairs with Bacteriostatic Water and Acetic Acid 0.6% for reconstituting lyophilized research peptides, and with the 3ml Vial caps pack of 10 for closing prepared vials. It is also a natural companion to the Research Starter Kit and the Peptide Vial Storage Case for researchers setting up a complete laboratory preparation bench.
Easy Touch U-100 Insulin Syringes with Needle are produced under the FDA 510(k) processes of MHC Medical Products. That controlled manufacturing covers every component, including needle grinding and barrel calibration, so gauge, length, and volume markings stay consistent from syringe to syringe. The needle sharpness characteristics were evaluated by STR Labs.
Keep the Easy Touch U-100 Insulin Syringe with Needle in its sealed wrapper in a clean, dry place at room temperature until it is needed. Do not use a syringe if the wrapper is damaged or the needle cap is missing. Each syringe is single use, and used syringes belong in a proper sharps container according to laboratory safety rules.
No. The Easy Touch U-100 Insulin Syringe with Needle is a single-use item. Reusing a syringe dulls the tri-bevel tip and risks contaminating a research vial. Laboratory practice is to use a fresh syringe for each vial and each draw, then discard the used syringe in a sharps container. The pack of 10 is sized so a fresh syringe is always available.
The Easy Touch U-100 Insulin Syringe with Needle is sold strictly as a laboratory supply for research use by qualified researchers and research organizations. Purchasers must be 21 or older. The research peptides it is used with are not drugs or dietary supplements and are not for human or animal consumption. Biotech Compounds supplies this syringe only to support laboratory research preparation.
You May Also Like
